Replace a Sledgehammer, Ax, or Maul Handle

Replace a broken wood handle with a fiberglass handle using epoxy to bond the handle to the sledgehammer head

By the experts at The Family Handyman

From The Family Handyman

Make Tool Handles Last

When you’re swinging a big-impact tool like an ax, maul or sledgehammer, every miss takes its toll on the handle. Eventually the handle will break or the tool head will loosen. Replacement wooden handles secured with wedges ($8) are OK, but for a few dollars more you can buy a replacement fiberglass handle that could still be swinging in 100 years. The kit contains a fiberglass handle and an epoxy packet. The epoxy and hardener are in one packet with a divider rod in the middle. When you remove the divider rod, you can mix the contents without mess or smell.

Photos 1 and 2 show how to remove the most stubborn old handle. Next, clean the inside of the eyehole (Photo 3). Epoxy won’t bond to rusty or greasy surfaces. Insert the new handle and bounce the bottom of the handle on concrete if you have trouble getting the top of the handle core flush with the top of the tool head. If they’re still not flush, file or carve the new handle to fit.

The epoxy mix (Photo 4) will seal all the gaps between the handle core and the sledgehammer head, but it must be thoroughly blended or it won’t set up. The temperature needs to be between 75 and 115 degrees F for proper curing. Pour the epoxy between the handle core and the hammerhead as shown in Photo 4.Wipe off any excess and let it cure for a week before using the tool.

• Sharpening Mower Blades, Axes and Shovels
• A bench grinder, file and cone-shaped blade balancer are the key tools for creating a sharp edge and well-balanced blade. Plus, how to file and hone an axe using a sharpening stone, and even how to sharpen a shovel.
• 
• Painless Tree Stump Removal
• Use potassium nitrate stump remover to decompose old stumps
• 
• Sledge Hammer
•