Del.icio.us
Digg
Reddit
Facebook
StumbleUpon
TwitThisSteps 9 to 12
9. Cut out the stamps and put a little clear glue on the back of each one. Put the glue on the stamped areas so that it doesn't show on the front.10. Stick one square onto each corner of the mount. Align a corner of the square with an inner corner of the mount.
11. Stick four long lengths of lead right across the mount in one direction, aligning them with the edges of the squares. Rub the lead down, and trim the ends as before.
12. Stick down four more lengths, running in the opposite direction and aligning with the outer edges of the squares. Reassemble the frame.
Advertisement 
