Step-by-Step Instructions and Pictures of How to Properly Use a Roof Safety Harness

by Jeff Gorton
How to properly use a safety harness or a personal fall arrest system, while working on roofs to prevent accidents. Read an overview on how to properly use a roof safety harness.
From The Family Handyman
Related Topics
How to Properly Use a Roof Safety Harness-Step 2
Previous
Previous Image
Next
Next Image
Image 2 of 6

2. Lay a 2x6 plank across the brackets and attach it to the brackets with screws. Make sure the 2x6 extends at least 6 in. but not more than 12 in. past the end brackets. Set another row of roof brackets and planks about every 8 ft. up the roof, or as close together as needed to make your work safe and convenient.
Share Your Comments
Post a Comment
Name
Comment
Remaining Character Count:
 
See All Comments
Advertisement

How to Install a Ceiling Fan and Light-Step 1 Step-by-Step instructions and pictures of How to Install a Ceiling Fan and Light
The Correct Technique Step-by-Step Instructions and Pictures for How to Use a Bench-Top Planer
Casting a Fountain Step-by-Step Instructions and Pictures: How to Cast a fountain from Concrete