Step-by-Step Instructions and Pictures of How to Replace Torn Fiberglass Screen With Heavy Duty Screen Mesh

By the experts at The Family Handyman
Use special thick screening for storm doors that get ripped by pets or kids. Read an overview on how to replace torn fiberglass screen with heavy duty screen mesh.
From The Family Handyman
Related Topics
How to Replace Torn Fiberglass Screen With Heavy Duty Screen Mesh-Steps 1 & 2
Previous
Previous Image
Next
Next Image
Image 1 of 3

1. Pull out the old spline and remove the old screen. Cut a new piece of screen about 4 in. wider and longer than the old one. Also cut four pieces of new spline, making each a couple of inches longer than the sides of the frame.


2. Clamp the screen to one long side of the frame. On the opposite side, roll the spline into the groove, stretching the screen as you go. Remove the clamps and add spline on the other side. Repeat the process on the short sides.

Share Your Comments
Post a Comment
Name
Comment
Remaining Character Count:
 
See All Comments
Advertisement

How to Repair a Car Heater Hose-1 Step-by-Step Instructions and Pictures: How to Repair a Car Heater Hose
How to Replace a Broken Storm Door-Step 1 Step-by-Step Instructions and Pictures for How to Replace A Broken Storm Door Handle
locating shutoff valves Step-by-Step Pictures and Instructions for Locating Gas and Water Shutoff Valves