Step-by-Step Instructions and Pictures of Router Table Techniques and Tips

By Jeff Gorton
Make joints and edges using a router table. Read an overview on router table techniques and tips.
From The Family Handyman
Router Table Techniques and Tips
Previous
Previous Image
Next
Next Image
Image 1 of 6

1. Shape the edge of boards. Clamp featherboards to the fence and tabletop so they apply moderate pressure to the board. Feed the board through the router at a steady rate. Hook the notch on the push stick over the end of the board and use the stick to push the board past the bit at the end of the cut.
Share Your Comments
Post a Comment
Name
Comment
Remaining Character Count:
 
See All Comments
Advertisement

getting tight-fitting joints on door and window casing and base trim. Step-by-Step Pictures and Instructions for Shaving Technique for Tough Corners
jigsaw instructions, cutting wood with a jigsaw Step-By-Step Pictures and Instructions To Use a Jigsaw
Installing deck lighting Step-by-Step Instructions and Pictures: How to Install Deck Lighting