Step-by-Step Pictures and Instructions To Build a Pet Food Dispense

By Jeff Timm
Organize, cut the clutter and tools, clean up the workbench and garage floor. Read an overview of how to build a pet food dispenser.
From The Family Handyman
Previous
pet food dispenser
Image 8 of 9
Next
7. Remove the center molding and enlarge the hole in the acrylic with a 1/4-in. bit to provide room for expansion. Press the drill gently so the bit doesn’t grab and crack the acrylic. Replace the molding and nail it on. Cut the piano hinge to length and screw it to the top.
M Box
Share Your Comments
Remaining Character Count:
 
Privacy Policy
 

Advertisement

Advertisement