Back To The Family Handyman
From 
Del.icio.us
Digg
Reddit
Facebook
StumbleUpon
TwitThisITEM | QTY. |
Pressure-treated 4x4 x 10' posts | 3 |
Pressure-treated 1x4 x 8' post wraps | 8 |
Pressure-treated 1x4 x 8' fascia | 7 |
Composite polymer columns with bases and capitals | 6 |
Pressure-treated 2x10 x 16' (E) | 2 |
Pressure-treated 2x10 x 14' (F1) | 2 |
Pressure-treated 2x10 x 12' (F2) | 1 |
Pressure-treated 2x10 x 10' (decorative tails) | 4 |
Pressure-treated 1x6 x 12' ledger strips (G), ripped to width | 2 |
Pressure-treated 2x8 x 8' rafters | 16 |
Pressure-treated 5/4 x 6 x 10' decking ripped to 3" (tail tops) | 8 |
Pressure-treated 5/4 x 6 x 14' decking ripped to 3" (lattice) | 9 |
Pressure-treated 2x4 x 10', ripped to 2-1/4" for subbase | 3 |
60-lb. bags of dry mix concrete | 30 |
Concrete forming tubes (2' lengths) | 6 |
Construction adhesive | 2 tubes |
3" exterior screws (zinc plated) No. 12 size for posts | 48 |
3" deck screws | 5-lb. box |
2-1/2" deck screws | 5-lb. box |
1/2" PVC pipe | 6' |
90-degree 1/2" PVC elbows | 6 |
Stain and paint of your choice | |
Auto body filler | |
Simpson A21 steel angle | 6 |
KEY | PCS. | SIZE & DESCRIPTION |
A | 6 | 3-1/2" x 3-1/2" x 56" treated posts |
B | 24 | 3/4" x 3-1/2" x 32" treated post shims |
C | 6 | 7-1/2" x 96" round columns |
D | 12 | 1-1/2" x 5-1/2" round discs |
(column inserts) | ||
E | 2 | 1-1/2" x 9-1/4" x 185" front and back beams |
F1 | 2 | 1-1/2" x 9-1/4" x 145-1/2" side beams |
F2 | 1 | 1-1/2" x 9-1/4" x 142-1/2" center beam |
G | 4 | 3/4" x 1-1/2" x 142-1/2" ledger strips |
H | 16 | 1-1/2" x 7-1/4" x 91-3/4" flat rafters |
J | 23 | 1-1/16" x 3" x 33" tail tops |
K | 23 | 1-1/2" x 9-1/4" x 17" decorative tails |
L1 | 8 | 1-1/16" x 3" x 153" lattice strips |
L2 | 1 | 1-1/16" x 3" x 134" center lattice strips* |
M | 4 | 3/4" x 3-1/2" x 91-3/4" fascia strips* |
N | 18 | 3/4" x 3-1/2" x 14-1/2" fascia strips |
P | 24 | 1-1/2" x 2-1/4" x 12-1/4" sub- base (under molded base) |
| * | Cut to fit |
Advertisement 
