Print | Close X

How to Install a Ceiling Fan and Light

Hang a new ceiling fan on any ceiling with these clear, step-by-step instructions

By Travis Larson
From The Family Handyman

About This Project

You don’t have to be a “Casablanca” aficionado to appreciate the elegance a ceiling fan can bring to your home. And you can enjoy a fan all year long as it creates a welcome breeze in the summer and circulates warm air in the winter.

Ceiling fans (technically called “paddle fans”) used to be frustrating to install, to say the least. Most of the time you had to wing it because specialty hanging systems were poorly developed or nonexistent. Nowadays, most manufacturers have designed versatile mounting systems that take the hassle out of installation. When you add in the improved, stronger ceiling boxes, you’ll find that just about any ceiling fan can go up quick and easy on any ceiling, sloped or flat.

In this article, we’ll illustrate crystal-clear instructions that go beyond the basic set included with the fan. We’ll also show you how to avoid common pitfalls like putting on parts in the wrong order and forgetting to slip shrouds on ahead of time. Some mistakes are more serious than these. Standard electrical boxes or blades hung too low can be downright dangerous.

Expect to spend at least $150 for a high-quality fan and a bit more for accessories like electronic controls, fancy light packages and furniture-grade paddles.

Buying A Ceiling Fan
If you haven’t walked under a large fan display yet, hold onto your hat. You’ll be over-TAB whelmed by the selection of colors, styles and accessories, especially if you visit a ceiling fan store. If you intend to use your fan regularly, invest in a model in the $150-plus category. You’ll get a quieter, more efficient, more durable unit. If you spend beyond that amount, you’re usually paying for light packages, radio-actuated remote and wall controls, style, and design (fancier motor castings, inlays, blade adornments or glasswork). If you spend less, you’re likely to get a less efficient, less durable, noisier unit with fewer color, blade and electronic choices.

Choose the blade diameter that best suits the room visually and make sure the unit will fit under the ceiling without jeopardizing SLOT beehive hairdos. Bigger rooms call for wider fan blade diameters. The bigger fan will not only look better but also move more air.

Most ceiling fans are designed for heated, enclosed spaces. If you’re putting a fan in a screen room, a gazebo or other damp area, the building code requires you to use a “damprated” fan. These fans have corrosion-resistant stainless steel or plastic parts that can stand up to high humidity and condensation. If you live in a coastal area with corrosive sea air, or if you’re putting a fan in a particularly wet environment like a greenhouse or an enclosed pool area, you should choose a “wet-rated” fan.


How to Install a Ceiling Fan and Light-Installation

Put Up A New Fan In A Leisurely Saturday Afternoon
If everything goes well, you can put up a ceiling fan in a couple of hours, including cleanup. In most cases, the whole job will take only a hammer, a screwdriver, a 3/8-in. nut driver and a wire stripper.

Most of the time, the wires that fed a previous ceiling light fixture are adequate for hooking up a new fan. If you have a wiring arrangement that’s different from ours and you are unfamiliar with wiring techniques, consult an electrician or building inspector for help.

Follow the photo series (see slideshow) for basic installation steps that apply to more than 95 percent of all fans. There may be small variations, particularly when it comes to the light and blade mountings, so you’ll still need to consult the instructions provided with your fan. As with any other electrical work, you may need an electrical permit from your local building department before starting the job. The inspector will tell you when to call for an inspection.

Replace Electrical Boxes With Specially Designed Paddle Fan Braces
Before starting any work, shut off the circuit breaker that feeds the switch and light fixture. If there’s a working bulb in the fixture, turn it on. Then you’ll know you have the right breaker when the bulb goes out. Check the wires with a voltage tester to make sure they’re off after removing the fixture and when changing the wall switch.

The next step is to remove the existing plastic or metal electrical box and install a “fan brace” that’s designed to hold ceiling fans. Few conventional boxes are strong enough to support a ceiling fan, so don’t even think about trying to hang your fan from an existing box. Instead, buy a fan brace (about $15) when you purchase your fan. You can choose braces that fasten with screws if the framing is accessible from the attic or if it’s new construction. Otherwise, pick a brace that’s designed to slip through the ceiling hole and through the electrical box. These braces adjust to fit between the framing members in your ceiling; you simply rotate the shaft to anchor them to the framing.

Most existing electrical boxes are fastened to the framing with nails, making them easy to pound out with a hammer and a block of wood. After you free the cable, just leave the old box in the cavity rather than struggling to work the box through the ceiling hole. Then pull the cable through the hole and slip the fan brace through the opening and secure it, following the directions that came with the brace. Little feet on the ends of braces keep them the correct distance from the backside of 1/2-in. thick ceilings so the new electrical box will be flush with the surface. If you have a thicker ceiling (like ours), rotate the ends to achieve the correct spacing.


How to Install a Ceiling Fan and Light-Installation

New Electronic Controls Save You From Running Additional Wiring
Since most fan installations are retrofits into existing electrical boxes, there’s usually a single electrical cable connecting the fixture to a single wall switch. You can leave the switch and use it to turn the fan on and off, then use the pull chains on the fan to control fan speed and lights. A second option is to install electronic controls. Higher-quality fans give you the option of adding a radio receiver kit for about $75. The receiver accepts signals from a special wall switch (included in the kit) to control the fan and light separately without additional wiring. The receiver also accepts signals from a handheld remote, so you can operate multiple fans and fine-tune fan speed and light intensity from your La-Z-Boy. Electronic switches are matched to fans by flipping code toggles in the controls and the fan, just like with your garage door opener. Installing an electronic switch is a snap. The receiver drops right into the fan housing and plugs into the bottom of the motor.

If the old light is fed by two threeway switches instead of a single switch, the control options are a little more complicated. You have three choices:

  1. Leave the existing switches in place and turn one of them on. Then use a remote to control the fan and lights.

  2. Use the existing switches and control the fan and lights independently with pull chains.

  3. Disable one of the three-way switches and rewire the other one to receive a wall-mounted electronic control. Sorting out all the wires is complex. You’ll need an electrician’s help for this.

BUYER’S GUIDE
Minimum downrod length (in inches) for angled ceilings Ceiling Slope

Blade Dia.

3/12

4/12

5/12

6/12

8/12*

10/12*

12/12*

27 in.

6

6

6

12

18

24

36

36 in.

6

6

6

12

18

24

36

44 in.

6

6

12

12

24

30

42

52 in.

6

12

18

18

24

30

42

56 in.

12

12

18

24

30

36

48

Fan Height Requirements
Manufacturers generally require that fan blades be at least 7 ft. above the floor. Since most fan and motor assemblies are less than 12 in. high, they’ll fit under a standard 8-ft. ceiling with the proper clearance.

Angled ceilings require that you install “downrods” (also called extension tubes or downtubes) that will lower the motor and fan blades so they’ll clear a sloped ceiling surface. The more space between the ceiling and the fan, the better. The fan will have more air to draw from, and you’ll feel more air movement because the blades are closer to you.

Most fans come with a short downrod designed for mounting on 8-ft. ceilings. If your ceiling’s less than 8 ft., you’ll need to remove the rod provided and flush-mount the fan. But if you have a higher or sloped ceiling, purchase a longer downrod.


Comments :

Print | Close X