Click image to enlarge.
1. Mark the notch
locations on the legs (A and B) using the dimensions in fig. A. Make a series
of 3/4-in. deep saw kerfs about 1/4 in. apart to create the
notches.
Click image to enlarge.
2. Chisel out the
waste wood from the notches and smooth the bottom with a wood
rasp.
Click image to enlarge.
3. Spread a small
bead of construction adhesive in each notch and lay the horizontal pieces in
place. Use a framing square to make sure the cross members are at right angles
to the legs, then drive a pair of 2-in. screws at each joint.
Click image to enlarge.
4. Screw the horizontal cross members (c and e) to
the back leg assembly. Drill and countersink the front leg assembly and attach
it to members C and E with 3-in. screws. Cover the screws with decorative wood
plugs.
