How to Replace A Casement Window Crank Operator

Install a new crank mechanism for a stubborn casement window.

By the experts at The Family Handyman

From The Family Handyman

Change Text Size

Change Text Size
|
Bookmark

Bookmark

Del.icio.us
Digg
Reddit
Facebook
StumbleUpon
TwitThis
|
Print
|
E-Mail

About This Project

If your window crank handle just spins when it’s turned, or it can’t pull in the sash far enough to engage the lock, chances are the gears are stripped and it’s time for a new crank mechanism. Replacing the crank mechanism is simple. But finding a new crank may take some time. Two excellent sources to call are Blaine Window Hardware, 17319 Blaine Drive, Hagerstown, MD 21740 (800-678-1919), and Replacement Hardware Mfg. Inc., 500 W. 84th St., Hialeah, FL 33014 (800-780-5051). You can mail them your old crank and you’ll get back a match. The cranks can be expensive, from $25 to more than $100, but they may be a bargain if the overall condition of the window is still good.

Start by inspecting the old crank operator and handle for wear. If the teeth are missing inside the crank handle, simply replace it ($10 to $20 at home centers and full-service hardware stores). But if the operator has broken or worn parts, replace the entire operator mechanism.

Your operator may vary slightly from the one we show. However, the replacement process is similar. The first step is to disconnect the crank arm from the guide track. Take out the screen and crank the window open until the plastic guide bushing aligns with the guide track notch.

Next, look for trim mounting screws inside the screen track. Unscrew them to remove the casement cover and access the crank innards. If there aren’t any trim screws, the casement cover is probably nailed or stapled in place. Slide a stiff putty knife between the window jamb and casement cover. Carefully pry up the casing so you don’t damage the wood parts.

Close the window and lock it until the new crank arrives. Compare the new operator with the old, making sure they match.