Back To The Family Handyman
From 
Del.icio.us
Digg
Reddit
Facebook
StumbleUpon
TwitThis
About This Project
Fastening towel bars, shelves or hooks to a fiberglass or plastic shower surround can be tricky. The surround is simply too thin to hold screws and there’s often a gap of 1 in. or more between the surround and the wall studs behind it. But with 1/8-in. toggle bolts, you can mount most light-duty hardware (like the adjustable shower head bar shown here). Keep in mind that this leaves big holes (3/8 in.) in the surround that can’t be patched later, so anything you mount will have to stay there permanently. The mounting system shown here isn’t strong enough to support the full weight of a person, so we don’t recommend it for installing safety grab bars.
Everything you need is available at home centers and hardware stores.
Here are some pointers:
• When you’re drilling through the side of the surround where the shower valve is mounted, apply only light pressure as you drill. Otherwise, you might suddenly punch through the surround and puncture pipes.
• When you buy toggle bolts ($2 per pair), also buy brass machine screws ($1) to replace the steel screws that come with the toggles. Steel heads will rust and stain the surround.
• When you tighten the toggle bolts, it’s OK to use a drill. But do the final tightening by hand. Too much torque can crack the surround.
Advertisement 
