Check your chimney or risk a fire
Creosote buildup causes chimney fires. You should have your chimney professionally inspected or cleaned after every 70 fires. If you burn wet wood (which you shouldn’t), have it inspected or cleaned every 50 fires. Your fireplace is one of the things in your home that may be a fire hazard.
Creosote buildup may not look dangerous, but it ignites at a mere 451 degrees F, and once it starts burning, it expands like foam sealant. In less than a minute, it builds to more than 2,000 degrees F and can engulf your entire chimney and destroy your home.
If you see moisture bubbling out the ends of the logs when they’re burning, the wood is wet. This green wood doesn’t burn cleanly and sends a lot of unburned particles (smoke) up the chimney, where they build up as creosote and soot. Dry hardwoods, such as oak and birch, burn hotter and cleaner. With them, have your chimney cleaned or inspected every 70 burns.
Set aside some time now to complete these simple must-do things to get your home ready for fall.
Do a quick chimney buildup check
Most chimney fires start in the smoke chamber/smoke shelf area, so it’s the most important area to clean. Since that area is hard to reach in some fireplaces, check yours to see if you can reach into it and still have room to maneuver a brush.
Don’t remember the last time you had it cleaned by a pro? A quick way to tell if your chimney needs cleaning is to run the point of your fireplace poker along the inside of your chimney liner. If you find a 1/8-in. layer (or more) of buildup, call a chimney sweep. Here’s how to clean a chimney yourself with just a few simple tools. For additional expert chimney maintenance advice, check out the other fall cleaning tasks every smart homeowner tackles.