DIY Bathroom Storage Solutions
Carve out more space in even the tiniest bathroom — no remodeling required!
1. Craft a hidden toothbrush organizer
If you keep your toothbrushes in the medicine cabinet stacked on a shelf, they probably fall out when you open the door. If you cut notches in the cabinet shelves, you’ll solve this annoying nuisance. Use a rotary tool along with a woodcutting bit and sanding drum.
2. Use PVC piping to hold razors
Keep your razor from falling into the tub with this simple holder. Cut a 3-in. length of 1-in. PVC pipe with a handsaw. Cut two 1/8-in.-wide notches in the pipe. Strap the pipe to your wire shower caddy with two plastic tie straps hooked in the notches. Drop the razor into the pipe; the blade will catch on the edges of the pipe, keeping the razor off the floor.
Organize all your stuff with FamilyHandyman.com’s 7 simple ideas.
3. Mount electric toothbrushes
Most toothbrush holders aren’t big enough for electric toothbrushes. They end up falling out of the holder or taking up too much room on the vanity. Here’s a clever storage idea: Make a holder for them using large grip-type clips. Mount the clips on your medicine chest or on a piece of wood that you can hang on the wall. The clips work great to keep your toothbrushes secure!
Use the kind of large grip-type clips you normally use for brooms or garden tools, (available at hardware stores and home centers for $3.50 a pair).
4. Store shower supplies on a handy shelf
Tired of the clutter of shampoo and conditioner bottles along the rim of your tub? This tempered safety glass shelf on a cable shelf bracket is an easy solution. The cable shelf bracket requires only two screws for support. If studs aren’t located in the right positions, use toggle bolts to anchor the shelf brackets. The glass hangs on the cables. The cable shelf brackets (No. CSB5B) are available online from expodesigninc.com and cost $21 per pair. Order a tempered glass shelf from a local glass company. The 3/8-in.-thick, 12-in.-deep shelf shown here cost $64.
Yes, you can remodel your bathroom without destroying it. FamilyHandyman.com shows you how.
5. Use PVC pipe to organize curling irons and cords
Hate the messy look of curling irons lying on the vanity or the toilet tank? Here’s a tip for you. Use hook-and-loop tape to attach 5-in. lengths of 2-in.- diameter PVC pipe to the vanity door to hold the curling irons. Do the same thing with 3-in. pieces of 1-1/2-in.-diameter pipe to hold the cords. Just measure your curling irons to see how long your “holsters” need to be. Let your curling irons cool before you stow them away.
6. Make a magnetic toothbrush holder
Do your toothbrushes end up lying on a wet, messy vanity? Here’s a clever solution: Mount neodymium (“rare earth”) magnets on a Corian mounting strip with Super Glue. Glue the strip to the wall with Super Glue or silicone caulk. Note: Neodymium magnets are incredibly strong but break if handled roughly. Order several more than you need—shipping is expensive. Also, don’t handle neodymium magnets if you wear a pacemaker, and never leave them next to your computer. For more safety information, see the “Neo Mag Safety” link at kjmagnetics.com.
7. Under-cabinet cleanup
When the floor of your sink cabinet needs a spruce-up, lay down squares of self-adhesive vinyl tile. They’re about a buck a square at home centers and provide an easy-to-wipe clean surface.