Share on Facebook

New Year’s Resolutions for Your Home

Easy tasks that will make you happier, healthier, and even wealthier!

Every product is independently selected by our editors. If you buy something through our links, we may earn an affiliate commission.

Miniature worker team create number 2020 and remove number 2019 , Happy new year 2019 conceptSirichai Puangsuwan/Shutterstock

New year, better home


New Year’s resolutions have become a part of everyday life and cover a range of topics: working on your bucket list, learning how to budget and work on your finances, and finally, working on your home. From wanting a sparkling dishwasher to adding home alarms, these are the things to keep in mind when reviewing your home. Before you get started, you’ll want to know these home improvement hacks you’ll wish you knew sooner.

Modern bathroom with a shower cabin. Interior design.ppa/Shutterstock

Prevent bathroom mold

No matter where you live, the high moisture level in your bathroom can cause mold and mildew. Eliminating bathroom dampness is the key to keeping mold from growing. To do that, follow these steps:

First, after a bath or a shower, squeegee water off the shower walls. That eliminates at least three-fourths of the moisture that supports mold and mildew growth.

Second, run your bath fans during your bath or shower and for a half-hour after to flush out moisture. Or add a timer switch to make this step automatic.

Third, if you have tile, seal the grout lines annually with a standard grout sealer to waterproof them.

To get rid of the current mold, scrub with detergent and water, then let the surface dry completely. Or use a solution of 10 percent bleach and 90 percent water (a stronger bleach solution will not give better results). Spray or brush on the solution, let it sit ten minutes, then rinse it off and let dry. If the fans aren’t clearing out most of the moisture in your bathrooms after five to ten minutes, your fans may not be moving enough air. Fans are certified by the volume (cfm, or cubic feet per minute) of air “exhausted” out of the room. To find the recommended fan capacity for your bathroom, simply multiply the bathroom square footage by 1.1 (assuming an 8-ft. ceiling; for a 9-ft. ceiling, multiply by 1.5). Check out some more cleaning solutions to get mildew out of any surface.

Showerhead.Boris Sosnovyy/Shutterstock

Restore free flow to your showerhead

If the flow from your showerhead is growing weaker, the cause is probably mineral buildup. Many manufacturers recommend that you remove the showerhead and soak it in a half-and-half mixture of warm water and vinegar (any type). But there’s really no need to remove the head. Just pour the mix into a heavy-duty plastic bag and attach it to the shower arm with a rubber band. The acid in the vinegar dissolves minerals, but prolonged contact can harm some plastics and metal finishes, so remove the bag every 15 minutes and check the shower flow. Here’s a list of things you should never store in your bathroom.

ventLesPalenik/Shutterstock

Clean out dryer lint

If you notice that it takes longer than normal for loads to dry in your clothes dryer, it may be time to clean out the vent. First detach the duct from behind the unit and then push a plumbing snake through your dryer vent from outside. Tie a rag securely to the snake end. Pull the cloth and snake through a couple of times and your clean vent will not only save energy but possibly prevent a fire as well. If you discover that your dryer vent cover needs repair, this is how to fix it, and this video shows you how to replace the vent if it’s in bad shape. Here are things that should never end up in your dryer.

Build-in dishwasher with opened door in a white kitchen Raisa Suprun/Shutterstock

Sparkling dishwasher

Add a cup of vinegar to your empty dishwasher and let it run a full cycle once a month or so. Your kitchen may smell a bit like a pickle jar for a few hours, but hard-water lime buildup will be rinsed away, making your spray arm and other dishwasher parts work flawlessly. Make sure you know the ways you’re shortening the life of your dishwasher.

A rain gutter downspout with water coming out from the side, with a flower bed in the background. Shallow Depth of Field.Jason Kolenda/Shutterstock

Check your gutters

A 1,000-sq.-ft. roof will shed about 620 gallons of water during a 1-in. rainfall, or about 103 gallons per downspout if you have six downspouts. That’s a lot of water dumped right next to your basement. Although it may seem obvious, clean and properly functioning gutters with downspouts that empty away from the foundation are key to avoiding major and expensive home repairs.

So before you leave for a vacation, take a walk around the house and check your gutters. Check to see if leaves, sticks, or other debris are blocking the inlet of the downspout and preventing water from flowing down the spout. Also make sure your downspout extensions are discharging the water far enough from the foundation and that you always reattach them after you mow your lawn. Here are things you should never do to your lawn.

Hands young women set the temperature of the water in the electric boiler. Spok83/Shutterstock

Avoid a scalding by setting your water heater to 120 degrees

Plain old tap water can be dangerous. Water heaters set too high send thousands (mostly children) to hospitals each year with burns. Most safety experts recommend a setting of 120 degrees F. But finding that setting on the dial isn’t easy—most dials aren’t labeled with numbers.

If the stickers on the water heater don’t tell you how to set the temperature and you can’t find the owner’s manual, use this method: Run hot water at the tap closest to the water heater for at least three minutes. Then fill a glass and check the temperature. If the water is above 120 degrees, adjust the dial, wait about three hours, and check again. Repeat until you get 120-degree water. For a final test, check the temperature the following morning, before anyone uses hot water. In the new year, you should also make sure that these 15 hidden home dangers aren’t a problem in your home.

A sump pump installed in a basement of a home with a water powered backup system.Jason Kolenda/Shutterstock

Test your sump pump

 

Sump pump systems help keep groundwater out of your basement. Before a vacation, test your sump pump by filling the sump pit with water and making sure the pump is actually pumping out the water.

If it doesn’t, be sure the sump pump is plugged in (a surprisingly common oversight) and check the breaker as well. Also make sure the outlet pipe isn’t frozen or clogged and that it directs water away from your home. Clean the hole in the discharge line and check that the motor is running smoothly. Also consider adding a backup battery to your sump pump so that it functions during power outages, which seem to go hand-in-hand with heavy rainstorms.

Door hinges on glass door in bathroom for wet zone - can use to display or montage on productKawin Ounprasertsuk/Shutterstock

Scum-proof your shower doors

Keeping shower doors clean and streak-free is a challenge—unless you know the pros’ secrets. Start by cleaning any mold, mildew, or streaks off the glass with a glass cleaner. Use a Mr. Clean Magic Eraser to get into the cracks in textured glass. Scrape off tough buildup with a razor blade. Dry the doors with a cloth.

To prevent soap scum buildup, stop using real soap and start using a synthetic. Chemically speaking, any soap in liquid or gel form is actually synthetic soap and much less likely to leave a tough film in your sink, shower, or tub. In a rush to clean your bathroom for guests? Here’s how to clean your bathroom in under ten minutes.

Window Seat with a view to the yard and large windows Krista Abel/Shutterstock

Seal a drafty window

Weather stripping often becomes loose, worn, or distorted when the sash drags or when the strip gets sticky and attaches itself to the frame, then pulls loose when the sash is opened. Windows have weather strip on the sash, frame, or both. Regardless of its location, the steps for removing and replacing it are the same. Weather stripping is available from your window manufacturer or online. The window brand and glass manufacturer date are etched in the corner of the glass or in the aluminum spacer between the glass panes. You’ll also need the height and width of your sash (take these measurements yourself).

If the weather strip is in good shape and loose in only a few places, like the corners, apply a dab of polyurethane sealant to the groove and press the weather strip into place. Otherwise, replace the entire weather strip. First remove the sash and set it on a work surface so you can access all four sides. If the weather strip is one continuous piece, cut it apart at the corners with a utility knife.

Starting at a corner, pull the weather strip loose from the sash. If the spline tears off and remains stuck in the groove, make a hook from stiff wire to dig it out.

Work the new weather strip into the groove, starting at a corner. You’ll hear it click as the strip slides into the groove. 

Once a Year, Inspect Your Foundation for Termites

Once a year, inspect your foundation for termites

Pull out your flashlight and walk around your home, examining the foundation, both inside and out, to inspect for termite tunnels. Much of the damage termites do is invisible, inside walls and floors. Take the time to look for telltale sawdust and tunnels, because termites can do major damage before you even know they’re there. If you spot signs of termites, call in a professional exterminator. Here are secrets termites don’t want you to know.

Floor heating. Young woman walking in the house on the warm floor. Gently walked the wooden panels.REDPIXEL.PL/Shutterstock

Silence squeaks

With a bare floor, you can eliminate floor squeaks the easiest, most effective way: by driving screws into the floor joists. Existing nails or screws tell you where the joists are. Walk around the room, pencil in hand, and mark squeaky spots. Drive screws 6 in. apart and add more screws if needed until the squeak is gone. In most cases, 2-in. screws are best; for subfloors thicker than 3/4 in., use 2 1/2-in. screws. If you want to prevent squeaks from developing, add screws along all the floor joists. Here are more annoying noises you’ll hear in your house—and easy tricks to eliminate them forever.

Silver metal deadbolt lock on a white doorDuntrune Studios/Shutterstock

Pick-proof your deadbolt


Even amateur thieves can pick a lock. To hold the deadbolt firmly in place so the door can’t open, install a deadbolt protection device. Slide the “lock” over the deadbolt handle to keep it from turning. Find out the most common signs your house is vulnerable to being robbed.

Door strike plate installation.kurhan/Shutterstock

Reinforce your entry door strike plate

Reinforcing your door’s weak spot, the jamb, with a heavy-duty strike plate and extra-long screws gives it the added strength needed to withstand a burglar trying to kick in your door. If your deadbolt was installed within the last ten years, it’s probably already reinforced. To check, simply remove the strike plate. If it’s heavy steel with at least 3-in. screws or has a heavy reinforcing plate, you can rest easy. If not, buy strike plate–reinforcing hardware.

To install, remove the old strike plate, then hold the new one in place and deeply score around it. Chisel out space for the new plate, then mount it by driving 3-in. screws through predrilled holes. Here are things burglars don’t want you to know.

Magnetic alarm sensor on window, 3D illustrationMile Atanasov/Shutterstock

Add inexpensive door and window alarms

Keeping doors and windows locked is your first line of defense. Make wireless alarms your second. Burglars hate noises, so even a small alarm usually sends them running. The alarms are available at home centers. The alarms don’t provide the same security as pro-installed monitored systems, since the wireless devices are activated by doors or windows opening (not glass breaking). Use the alarms for doors and windows in “hidden” areas of the house where you don’t normally gather and that are often dark.

Attach the alarm to the door or window (with a screw or double-sided tape) alongside the magnetic contact strip (they don’t have to be touching, but within 1/2 in.). When the door or window opens, breaking magnetic contact, the alarm shrieks (these little units have a piercing alarm). The door alarm has a delay feature, giving you time to set the alarm and leave, then open the door and deactivate the unit when you come home, without setting it off. The window unit has an on/off switch. The alarms will work on any door or window, and the batteries last two to three years. Here are the best home security systems, according to experts.

Batch of plywoodIvan Karpov/Shutterstock

Beef up your wooden garage entry door

A flimsy old wooden garage entry door has weak center panels that can easily be kicked in, making it a favorite target for thieves. Adding a deadbolt won’t solve that problem. A down-and-dirty way to beef up the door is to add a 1/2-in. plywood reinforcement panel and then bar it with two-by-fours placed in bar-holder brackets.

Cut the plywood to fit over the door’s center section (make sure it covers the windows but doesn’t cover the door handle). Fasten it to the door with drywall screws.

Test-fit a bracket and two-by-four against the door. Measure how far the bracket is from the wall, then cut filler strips that distance and install them. Fasten the brackets in place by drilling 1/4-in. pilot holes and inserting 3/8 x 3-in. lag screws. Place the two-by-fours in the brackets. Don’t make these garage mistakes that put you in danger.

Small home or hotel wall safe with keypad, closed doorMario Savoia/Shutterstock

Install a small safe

Most of us don’t need a big, heavy, expensive safe to secure our valuables. For $100, you can get a safe that will protect against thieves. Be sure to fasten it to the floor or wall so an intruder doesn’t walk off with it. Safes go up in price for options such as fire protection and digital or biometric (fingerprint-reading) opening systems. SentrySafe makes the ones shown here.

Install the wall safe or cylinder floor safe by bolting it to the floor (most safes have holes inside for just that purpose). Hide it in the corner of a closet or other inconspicuous area. Or mount the wall safe inside a wall and cover it with a picture. Or chip out a hole in your concrete slab and stick in the floor safe, then pour new concrete around it. These clever diversion safes can also fool burglars (and make good holiday gifts).

motion sensor flood light on white home sidingstockphotofan1/Shutterstock

Put motion detector lighting anywhere


Motion detector lights are a proven crime deterrent, and standard hard-wired models cost as little as $15. If running a power supply would be difficult, buy ones that run on solar power, like this Heath/Zenith solar model. The downside is the cost.

Removing Radon, the Silent Killer

Removing radon, the silent killer

Radon is a radioactive gas that moves through spaces in the soil and can enter a house through any opening, such as cracks in the foundation or the concrete slab. At elevated levels over long periods of time, radon can cause lung cancer and is the second leading cause of lung cancer behind smoking. Radon is estimated to cause 21,000 deaths annually in the United States. It’s colorless, odorless, and tasteless, and often called “the silent killer.”

Even if your neighbor’s house has a high level of radon, that doesn’t mean yours does. Each house is different, and age doesn’t matter; it can be found in new homes. Radon test kits are available at home centers and hardware stores for about $10. They usually involve setting a collector in your home for a week or so and then sending it to a lab for analysis. You’ll get results in about a week. (One manufacturer is Pro-Lab and charges $40; includes a postage-paid envelope.) Conduct the test in the lowest livable area.

If two tests give a high reading, consult a radon mitigation contractor (from a list provided by your state health department). These contractors can professionally test the house and install a mitigation system for reducing radon to a harmless level. The most effective system is a vent pipe placed in the sump pit or a hole made under your concrete floor slab. The vent runs up through the house and out the roof, or out the side of the house and up to the eaves. A special in-line fan for radon is placed in the attic or outside the house to suck air through the vent. Any openings in the slab or foundation are sealed to keep out radon. Pros usually charge up to $2,000 for installation. For more information, contact your state health department, the EPA radon hotline, (800-767-7236) or the radon fix-it program (800-644-6999).

Install Surge Protectors to Protect your Microprocessors

Install surge protectors to protect your microprocessors

Computer chips are sensitive and highly vulnerable to momentary power surges, especially powerful ones induced by lightning. Losing a $1,000 computer is bad enough, but losing photos, music, and other irreplaceable stuff on your hard drive is often much worse. Insulate your valuable microprocessors from this danger by plugging them into a surge protector. Better surge protectors will have the following ratings printed somewhere on the box: meets UL 1449 or IEEE 587; clamps at 330 volts or lower; can absorb at least 100 joules of energy or more; and handles telephone lines and video cables as well. Here’s a list of things you should never do during a power outage.

Two valves on plastic and metal pipes with hot and cold water. Open blue and closed red switches. Hot water is turned off. Closeup viewBykfa/Shutterstock

Gone for a while? Shut off water supply valves.

Always shut off the water before going on vacation. If you can’t shut off the main water supply because you have an automatic sprinkler system or someone watering the plants while you’re gone, shut off the valves to the most common sources of water damage, such as dishwashers, ice makers, and washing machines, in case a hose cracks or lets go. Individual shutoff valves or “stops” are installed on the supply lines leading to most appliances as well as to toilets and faucets. Typical supply stops have a small round or oval handle that you turn clockwise to shut off the flow of water. The shutoff to your refrigerator’s ice maker might be located under the sink or in the basement. Find out some more things smart homeowners do before going on vacation.

Top close view of a household surge protector on a wood table top.BW Folsom/Shutterstock

Mount a simple plug-in surge suppressor at the electronic device

This is the bare minimum. This gives good protection from surges generated within your home wiring system and fair protection from large surges from outside, like lightning. You’ll find a wide range of plug-in surge suppressors at electronics stores and on the Internet.

Here’s what to look for:

  1. Choose a surge suppressor that will handle both the electrical plug and any coaxial (TV) and data (telephone) lines that serve the component.
  2. Check the technical specifications for these minimum features: 330 volts (or less) clamping voltage, five nanoseconds (or less) clamping speed, and 500 joules (or more) energy dissipation. The packaging on the surge suppressor usually lists these figures. If in doubt, ask a store clerk for help. Generally, the lower the clamping voltage, the faster it responds to the power surge; and the higher the joule rating, the better the suppressor and the higher the price.

Note: The biggest hassle of installing a wall-mounted TV is hiding the wires. Running wires to new outlets behind the TV is one way to handle this, but the wall bracket that you buy for the TV must allow enough space for the surge suppressor.

Female hand destroying sheet of paper with shredder on wooden table, closeupAfrica Studio/Shutterstock

Shred papers to protect your identity

Identity theft is on the rise, and you may not even know you’ve been victimized until you apply for a loan and find out your credit has been ruined. One way to protect your identity is to shred your personal papers, including credit card offers, bank statements, and bills. Shredders start at $20 at office supply stores. More expensive models shred credit cards, CDs, and multiple sheets of paper. Some even “micro-shred” documents for added security. Find out some surprising documents you never knew you should be shredding.

energy audit conceptAndrey_Popov/Shutterstock

Get an energy audit

An energy audit entails a series of tests, including the blower door pressure test, that tell you the efficiency of your heating and cooling system and the overall efficiency of your home. On the basis of the test results, the auditor will recommend low-cost improvements to save energy and larger upgrades that will pay you back within five to seven years. Audits take two to three hours and cost $250 to $400, but if you set one up through your utility company, you may be eligible for a rebate.

A basic part of an energy audit is the blower door test. The auditor closes all the doors and windows and then places a blower fan in a front or back door. This blower door test measures the “tightness,” or air infiltration rate. The pressure and flow gauge shows the difference between the inside and the outside airflow so the auditor can calculate the air leakage rate.

HVAC Air Conditioning Unit on concrete slap with new construction brick houseJohn Royal/Shutterstock

Service your air conditioner and save up to $65 a year

Roughly half of an average home’s annual energy bill (gas and electric), about $1,000, is spent on heating and cooling. Air conditioners placed in direct sunlight use up to 10 percent more electricity. If yours sits in the sun, plant tall shrubs or shade trees nearby—but don’t enclose the unit or impede the airflow. Place window units on the north side of the house or install an awning over them.

Keep your window or central air conditioner tuned up so it runs at peak efficiency. Every two or three years, call in a pro to check the electrical parts and the refrigerant (expect to pay $150).

If your central air conditioner is more than 12 years old, replacing it with an Energy Star model can cut your cooling costs by 30 percent and save maintenance costs. The payback for replacing a 12-year-old system is typically about eight years. An air conditioner’s efficiency level is measured by the seasonal energy efficiency ratio (SEER). The higher the number, the more efficient the unit. A 13 or 14 SEER rating is considered high efficiency.

Weatherstrip Hatches and Doors

Weatherstrip hatches and doors

After sealing the attic bypasses, push the insulation back into place with an old broom handle or a stick as you back out of the attic. Then finish up by sealing the access hatch with self-sticking foam weatherstrip. You may have to add new wood stops to provide a better surface for the weatherstrip and enough room for hook-and-eye fasteners. Position the screw eyes so that you slightly compress the weatherstrip when you latch the hatch. Use a similar procedure if you have a hinged door that leads to the attic.

Filtertab62/Shutterstock

Clean out the lint for dryer efficiency and save up to $25 a year

A clogged lint screen or dryer duct drastically reduces the efficiency of your dryer, whether it’s gas or electric. Clean the lint screen after each load and clean the exhaust duct once a year. The Linteater has an auger brush that attaches to a drill to clean out the ducts.

Electric dryers use about $85 worth of electricity annually. A dirty lint screen can cause the dryer to use up to 30 percent more electricity, according to the Consumer Energy Center. Lint buildup is also a common cause of fires.

Dry loads of laundry back-to-back so the dryer doesn’t cool down between loads (a warm dryer uses less energy). And only run the dryer until the clothes are dry. Over-drying damages your clothes and runs up your electric bill. If you’re in the market for a new dryer and already have a gas line in the house, go with a gas dryer. A gas dryer is more efficient. Here are some more little things in your home that could be a fire hazard.

changing home furnace filterSerenethos/Shutterstock

Change furnace filter and save up to $60 a year

Keeping your furnace (gas or electric) tuned up has two big benefits: It makes the furnace run efficiently and it prolongs the furnace’s lifespan. And you can perform the annual tune-up yourself in about three hours.

Change the filter every month of the heating season (or year-round if the filter is also used for A/C). Be sure you insert the new one so it faces the right way. The filter protects the blower and its motor; a clogged filter makes the motor work harder and use more power. Next, read through these home repairs that anyone can do.

Originally Published on The Family Handyman